Leasing request
Description
DJI Matrice 400: Impressive flight time
The DJI Matrice 400 offers an exceptional flight time of up to 59 minutes. This long flight time allows you to perform extensive inspections and surveys without frequent interruptions. This feature makes the drone ideal for demanding tasks in emergency response and mapping.
Payload capacity of up to 6 kg
With a payload capacity of up to 6 kg, you can carry a variety of sensors and cameras. This makes the Matrice 400 the perfect choice for complex projects that require multiple devices at the same time. The flexibility in payload opens up new possibilities for you in power line inspection and AEC.
Integrated LiDAR and mmWave radar
The drone is equipped with integrated, rotating LiDAR and mmWave radar. These technologies enable a precise level of detection that extends to high-voltage power lines. This allows you to work safely and efficiently, even in challenging environments.
O4 Enterprise Enhanced Video Transmission
The O4 Enterprise Enhanced video transmission system ensures a stable and secure connection. Airborne relay video transmission significantly improves the handling and operation of the drone. This is particularly useful in missions that require high reliability.
Intelligent detection and automation
The Matrice 400 combines intelligent detection with visual and thermal imaging, AR projection, and advanced automation. These features make it an indispensable tool for surveyors and engineers. Whether taking off or landing from ships, the drone offers you superior performance.
Scope of delivery
- 1x Matrice 400
- 1x RC Plus 2 Enterprise Enhanced
- 1x RC Plus 2 sub2G SDR module
- 1x RC Plus 2 carrying strap and mounting kit
- 1x Matrice 400 2510F propeller
- 1x Matrice 400 gimbal damper
- 1x Matrice 400 carrying case
- 1x Calibration cover for rotating LiDAR
- 1x Front propeller mount
- 1x Rear propeller mount
- 1x USB-C to USB-C data cable
- 1x WB37 battery
- 2x E-Port V2 rubber cover
- 4x Screws for rubber plugs (2×2)
- 1x Screws and tools
- 1x cleaning tool set
Technical specifications
Drone
- Maximum takeoff weight: 15.8 kg
- Dimensions: 980 × 760 × 480 mm (L × W × H) when unfolded
- Maximum horizontal speed: 25 m/s
- Maximum flight time: up to 59 min (with standard setup)
- Max. wind resistance: up to 12 m/s
- Operating temperature: –20 °C to +50 °C
- GNSS: GPS + Galileo + BeiDou + GLONASS
- RTK GNSS accuracy: 1 cm + 1 ppm (horizontal), 1.5 cm + 1 ppm (vertical)
- Up to 6 kg payload capacity
FAQ
What is the maximum payload of the DJI Matrice 400 without a built-in sensor?
The Matrice 400 supports a maximum payload of up to 6 kg via the third gimbal port. When using multiple gimbal ports simultaneously, the total weight of non-DJI payloads must not exceed 6 kg.
Does the Matrice 400 require two batteries or just one?
The Matrice 400 uses a single TB100 flight battery. Thanks to the integrated capacitor, the battery can be replaced in about 45 seconds without having to completely restart the aircraft.
What is the IP rating of the Matrice 400 and can it be flown in the rain?
The Matrice 400 has an IP55 rating. However, it should not be flown in heavy rain. The IP rating may deteriorate over time due to wear and tear.
How does obstacle detection work on the Matrice 400?
The drone uses an omnidirectional binocular vision system, a downward-facing vision system, LiDAR sensors, and mmWave radar for precise obstacle detection in all directions.
What flight time can be expected with the Matrice 400?
The maximum flight time is up to 59 minutes in the standard setup. This time may vary depending on payload, weather conditions, and flight style.
What remote controller is used with the Matrice 400 and how does activation work?
The Matrice 400 is operated with the DJI RC Plus 2 Enterprise (Enhanced) remote controller. Upon initial activation, the remote controller connects to the internet via Wi-Fi or hotspot and is activated via the DJI Pilot 2 app.
Is the Matrice 400 suitable for surveying and mapping applications?
Yes. With its high payload capacity, long flight time, and precise flight control, the drone is ideal for professional surveying, inspection, and 3D mapping.
Are the Matrice 400 accessories compatible with the Matrice 350?
No. Matrice 400 accessories and payloads are not compatible with the Matrice 350 because the design and connectors are different.