Description
DJI Mavic 3TA with C1 certification
The DJI Mavic 3T Advanced (also known as Mavic 3TA) is officially C1 certified and can be flown with an A1/A3 drone license. This also means that users can operate the drone in urban areas without having to apply for costly special permits. The certification offers additional safety and legal certainty for professional use.
DJI Mavic 3TA improved thermal camera
The DJI Mavic 3TA's camera combines high-resolution sensors with optimized infrared image quality. This is achieved, among other things, by a narrower field of view with a 60 mm equivalent focal length (= 41� aperture angle) compared to 40 mm (= 61�) on the Mavic 3T C2 versionin addition, finer spatial resolution has been achieved (pixel pitch reduced from 12 �m to 8 �m)nbsp;Combined, this gives users significantly sharper images from the same flight altitude.
Long flight time and range DJI Mavic 3TA
With a maximum flight time of up to 36 minutes and a stable transmission range of up to 8 km, the DJI Mavic 3T Advanced enables efficient operations even over large areas. This reduces the need for frequent battery changes and increases productivity in surveying, agriculture, or firefighting operations.
Intelligent flight modes DJI Mavic 3TA
The intelligent flight modes of the DJI Mavic 3TA make it easier to control and allow even less experienced pilots to perform complex missions. Automatic route planning and obstacle detection increase efficiency and minimize risks during professional operations.
High compatibility with DJI software solutions
The DJI Mavic 3T Advanced is fully compatible with DJI Pilot 2 and other popular DJI ecosystems. This allows users to seamlessly integrate the drone into existing workflows, import mission plans, and analyze data in real time. This compatibility makes the drone a future-proof investment for businesses.
Scope of delivery
- 1x Mavic 3T aircraft
- 1x Mavic 3 Intelligent Flight Battery
- 1x 64GB microSD card
- 1x Gimbal Protector
- 3x Mavic 3 Enterprise Propellers (pair)
- 1x DJI RC Pro Enterprise
- 1x Screwdriver
- 1x DJI USB-C power adapter (100W)
- 1x AC cable for 100W power adapter
- 1x USB-C cable
- 1x USB-C to USB-C cable
- 1x Hard-shell case
- 1x DJI Care Enterprise Basic (1 year)
- 1x Maintenance Standard maintenance service during the DJI Care Enterprise Basic* period
Technical specifications
Drone
- Maximum takeoff weight: 899 g
- Dimensions: 347.5 � 283 � 107.7 mm (L � W � H)
- Maximum horizontal speed: 21 m/s
- Maximum flight time: 36 min
- Max. wind resistance: 12 m/s
- Operating temperature: -10�C to 40�C
- GNSS: GPS + Galileo + GLONASS
- RTK GNSS accuracy: 1 cm + 1 ppm (horizontal), 1.5 cm + 1 ppm (vertical)
- Internal memory: None
- Maximum zoom: 8x (56x hybrid zoom)
Wide-angle camera
- Size: 1/2" CMOS
- Resolution: 48 MP (effective pixels)
- Shutter type: electronic
- Field of view: 84�
- equivalent focal length: 24 mm
- Aperture: f/2.8
- Focus: 1 m to infinity
- ISO: 100 to 25600
- Shutter speed: 8 to 1/8000 s
Telephoto camera
- Size: 1/2" CMOS
- Resolution: 12 MP (effective pixels)
- Shutter type: electronic
- Field of view: 15�
- equivalent focal length: 162 mm
- Aperture: f/4.4
- Focus: 3 m to infinity
- ISO: 100 to 25600
- Shutter speed: 8 to 1/8000 s
Thermal imaging camera
- Sensor: Uncooled Vox microbolometer
- Frame rate: 30 Hz
- Field of view: 41.2�
- equivalent focal length: 60 mm
- Temperature measurement range:
- High gain mode: -20�C to 150�C
- Low gain mode: 0�C to 500�C
- Infrared wavelength: 8 to 14 ?m
- Infrared temperature measurement accuracy
- High gain: �2�C or �2% (whichever is greater)
- Low gain: �5�C or �3% (using the larger value)