Description
DJI Dock 3 for autonomous operations
The DJI Dock 3 is a weatherproof, stationary base for automated drone operations – the drone is not included in the scope of delivery. It serves as a takeoff and landing platform with charging function for compatible models such as the DJI Matrice 4D series. flights can be fully remote-controlled and automated via DJI FlightHub 2 – ideal for recurring inspection flights, drone surveying, or security applications. Please note: The compatible drone must be purchased separately.
Fast charging for continuous use
The DJI Dock 3 provides automatic fast charging for the drone in use – the system is ready to take off again in around 30 minutes. An intelligent cooling concept reduces charging times and protects the hardware. The dock is ideal for continuous drone missions, such as perimeter protection, infrastructure inspections, or automated construction monitoring.
Robust design with IP55 protection
With its IP55 certification, the DJI Dock 3 is optimally protected against dust, rain, and temperature fluctuations. It was specially designed for permanent outdoor use and is therefore perfect for industrial drone applications, agriculture, and government applications. The technology works reliably, even under demanding environmental conditions.
Technical specifications
Total weight
55 kg (without aircraft)
The actual weight may vary due to different batch materials and external factors.
Dimensions
Dock cover open: 1760 × 745 × 485 mm (L × W × H)
Dock cover closed: 640 × 745 × 770 mm (L × W × H)
All data includes the width of the RTK module (160 mm), the height of the wind speed sensor (145 mm) and the mounting brackets (58 mm).
Input voltage
100 to 240 V (AC), 50/60 Hz
Input power
Max. 800 W
Operating temperature
-30 °C to 50 °C
Protection
IP56
Max. permissible wind speed during landing
12 m/s
Maximum altitude for operation
4500 m
Output voltage
35 V DC
Charging time
27
The data was measured while charging the aircraft (in switched-off state) from 15% to 95% in an environment at 25°C.
Dock – video transmission
Operating frequency
2.400 to 2.4835 GHz
5.150 to 5.250 GHz (CE: 5.170 to 5.250 GHz)
5.725 to 5.850 GHz
The supported operating frequency bands and their availability vary depending on the country/region. For details, refer to local laws and regulations.
Antenna
9 integrated antennas, 2 transmitters, 4 receivers, supports intelligent switching
Dock – air conditioning
Operating voltage
48 V DC
Air conditioning type
Compressor-based air conditioning
Battery type (dock backup battery)
Lead-acid battery
Battery life (dock reserve battery)
> 4 hours
Measured with fully charged backup battery at 25°C. After a power failure, the dock does not support functions such as aircraft charging, air conditioning, cover heating, and wind speed display. Please restore power immediately.
Ethernet
Adaptive Ethernet connection with 10/100/1000 Mbit/s
4G mobile
Requires DJI Mobile Dongle 2
Sold separately. This service is not available in some countries and regions. Please contact your local dealer for details.
Sensors
Wind speed, rain, ambient temperature, water immersion, interior temperature, interior humidity
Interior humidity sensor
Supported
Lightning protection for power connection (AC)
20 kA (nominal value), meets the protection level requirements according to EN 61643-11 Type 2 and IEC 61643-1 Class Ⅱ.
Lightning protection for Ethernet connection
10 kA (total), complies with protection class EN/IEC 61643-21 CATEGORY C.
Applications
DJI Enterprise App (used with Android smartphones for setup and commissioning)
Cloud platform
FlightHub 2
FlightHub 2 On-Premises Version
FlightHub 2 FlightHub Sync
DJI Cloud API
Edge computing
Supports data communication with external switches
Frequently asked questions
Workflows and applications
What does a typical use case look like?
- Mission planning is carried out via DJI FlightHub 2
- The drone takes off automatically from the dock
- Carries out the mission (e.g., inspection, mapping)
- Returns automatically and recharges
- Data is automatically uploaded and analyzed
What does a typical setup look like?
- Dock 3 with power supply and LAN connection in the field
- Manual or pre-programmed flights via DJI FlightHub 2 in the browser
- Pilot must monitor drone flight while the drone is in the air
Can I manage multiple docks at the same time?
- Yes. With DJI FlightHub 2, you can manage and coordinate multiple docks regardless of location.
How does the data get to the server for evaluation?
- the data is transferred to a cloud server via the Internet connection
- the data is evaluated either directly in the cloud or locally after download
Do I need to perform maintenance on the drone?
- Yes, first a pre-flight check must be carried out at regular intervals (legal requirement)
- DJI specifies maintenance after flight hours and every 12, 24, and 36 months, which must be carried out by a certified body such as Airclip
Legal aspects (Germany & EU)
Can I control multiple dock drones with one pilot?
- Yes, if the drones are not in the air at the same time
- In other words, one drone lands and the next one can take off
- Otherwise, the number of pilots must be equal to the number of drones in the air
- Pilots need A2 + STS theory training
What permits do I need?
- Operation is usually in the "special" category (Specific Category according to EASA)
- SORA (Specific Operations Risk Assessment) required
- Flight permit from the Federal Aviation Authority or the state aviation authority
- BVLOS flights (Beyond Visual Line of Sight) are subject to approval